Ⅰ.Product introduction
The FMI valve position indicator is a combination unit with mounting surface for directional control valves ∮6 according to ISO 4401-03-02-0-02/DIN 24340-A6. In detail the module consists of a hydraulic manifold, a gear type volume counter and an indicator. Mounted on a connection plate and completed by a directional control valve，the FMI valve enables to control hydraulic operating ship armatures for ballast, cargo-and stripping systems of all kind of tankers. In addition to that the adjusting path of the armature will be measured and displayed. The valve position indicator is suitable for the installation into deck boxes. The indication of the volumetric entered armature position can be read off optically locally or can be taken electrically by potentio meters or open/closed switches.
Ⅱ、Structural composition & General characteristics
1.Structural components
A.With the electro magnetic solenoid valve adopts the plate-type installation
B.Flow meter indicator without solenoid valve, with pipe type threaded connection
2.Technical characteristics
Design： Gear meter
Connection： Flange/Thread
Mounting position： optional
Liquid temperature：Min = -20℃ Max = +80℃
Operating pressure：Max = 200 bar
Maximum flow of hydraulic oil：
1）FMI04: 0.25 L/min ≤ Q ≤ 6 L/min
2）FMI 08: 0.30 L/min ≤ Q ≤ 7 L/min
Oil viscosity：Vmin = 20mm/s Vmax = 380mm/s
Fluids：Mineral oil acc.to DIN 51524/25 other fluids on reque
Ⅲ. Flow valve position display (FMI series) model description
Ⅳ.Flow valve position display (FMI series) selection table
Ⅴ.Flow meter indicator overall dimensions and hydraulic working principle diagram
1.No solenoid valve, tube connection
A.Overall dimensions
B.Hydraulic principle diagram
2.Flow meter indicator connected with 3/4 solenoid valve
A.Overall dimensions
B.Hydraulic principle diagram
3.Flow meter indicator connected with single electric control 2/4 solenoid valve
A.Overall dimensions
B.Hydraulic principle diagram
4.Flow meter indicator connected with double electric control 2/4 solenoid valve
A.Overall dimensions
B.Hydraulic principle diagram
Ⅵ. Overall dimensions and schematic diagram of electrical wiring of the instrument panel
1.Overall dimensions
2.Schematic diagram of electrical wiring
Ⅶ. Remarks
1.The hydraulic oil flow into FMI valve position display should not be too fast (FMI04 type should be less than 6L/min.,FMI08 type should be less than 7L/min.), or it will affect the display accuracy of FMI valve position display. The working flow of hydraulic oil can be
adjusted by adjusting the speed regulating valve on the hydraulic valve block.
2.Normal hydraulic oil is suitable for this valve position display, the normal oil temperature should be controlled in -20 ℃ ~ + 80 ℃.
3.On the FMI valve position indicator using the tubular connection valve block, the direction of the pressure oil enters from the IN port and exits from the OUT port, and cannot be connected in the opposite direction. In addition, port T must be connected to the tank and submerged below the liquid level.
FMI flow valve position indicator （Download）
